Product Category

Share to:

PLM22-M

Quantity:



Inquire Add to Basket

Brand:
POLYMA
Code:
PLM22-M
Categories:
Wallpaper

Product Description

Application

Dimensions and Tolerances

Dimensions		Tolerances
Length	50m/100m	±5cm
Width	45cm/60cm/90cm/120cm	±5mm
Other dimensions could on your request

Polyma decorative film testing standard:

Surface Quality Standard

Description	Size of Defect	Results
Corrugation		Not obvious
Bubbling	≤5mm	Not more than 1 occurrence per m2
Flaw	≤3mm	Not more than 3 occurrences per m2
Scoring	≤100mm	Not more than 3 ocurrences per 500m
Scratch	≤300mm2	Not more than 3 ocurrences per 500m

Compliance Table

Description	Standard	Results
Composite film thickness (um)	GB/T 6672	≥65
Film width (m)	GB/T 6673	1.03/1.25/1.30
Film length (m)	GB/T 6673	500/1000
Pencil Hardness	GB/T 6639	≥HB
Adhesion	GB/T 9286，GB/T 1720	Not lower than level 1
Withstand impact	GB/T 1732	50 kg.cm no shad / crack
Film elasticity (Mpa)	GB/T 13022	≥200
Film break point (%)		≥120
180℃Degree Peeling Strength (N/mm)	GB/T 2790	≥2
Heat Difference Resistance	GB/T 17748	No effect
Boiling Water Resistance	GB/T 17748	No effect
Chemical Resistance
Acid	GB/T 17748	No effect
Alkaline	GB/T 17748	No effect
Oil	GB/T 17748	No effect
Solvent	GB/T 17748	No effect
Washing	GB/T 9266	No effect over 10,000 times

Certificate

Recommended pattern

Niches

Why choose us?

Raw material:
1-Ink
Features:
Uniformity color
Temperature risistance

2-Glue
Features:
Good adhesion, no bubble

3-PET film
Features:
Excellent physical properties, chemical properties.
Uniformity thickness.

Machine
1-We could improve the sharpness and clarity of patterns, also could create new colors which are difficult to customized.

2-Laminating machine, length is over 30m, which adopts closed loop and automatic tension control system, net-like rubber roll gluing and 25m oven. It make sure that the chemical residues of decorative film are lower than American standard.

3-Two 30㎡ oven. All finished products will be put in oven at least 72 hours to lower the chemical residues again and dry the glue.

QC
Testing before production:
1-Every batch of raw material will be tested.
2-All colors match by America X-Rite Color Master.

Testing during production:
QC will inspects product on production line every hour.

Testing after production:
1-Samples of every batch product will undergo 2 hours in boiling water test.

2-Samples of every batch product will undergo punching test for checking stretching and adhesion properties.

3-Polyma decorative film was certificated by ISO9001:2008 and Reach163.

Certificate

PLM22-M Wallpaper

Related Products

content is empty!

Product Category

PLM22-M

Related Products

Successful conclusion of the exhibition

New invention--Mosquito Repellent Metal Panel Film