Product Category

Share to:

PLM02-P3

Quantity:



Inquire Add to Basket

Brand:
POLYMA
Code:
PLM02-P3
Categories:
ACP Film

Product Description

Application

Dimensions and Tolerances

Dimensions		Tolerances
Length	500m	±5m
Width	1.25m	±5mm
Thickness	0.07mm	±0.005mm
Weight	65KG	±5KG
Other dimensions could on your request

Polyma decorative film testing standard:

Surface Quality Standard

Description	Size of Defect	Results
Corrugation		Not obvious
Bubbling	≤5mm	Not more than 1 occurrence per m2
Flaw	≤3mm	Not more than 3 occurrences per m2
Scoring	≤100mm	Not more than 3 ocurrences per 500m
Scratch	≤300mm2	Not more than 3 ocurrences per 500m

Compliance Table

Description	Standard	Results
Composite film thickness (um)	GB/T 6672	≥65
Film width (m)	GB/T 6673	1.03/1.25/1.30
Film length (m)	GB/T 6673	500/1000
Pencil Hardness	GB/T 6639	≥HB
Adhesion	GB/T 9286，GB/T 1720	Not lower than level 1
Withstand impact	GB/T 1732	50 kg.cm no shad / crack
Film elasticity (Mpa)	GB/T 13022	≥200
Film break point (%)		≥120
180℃Degree Peeling Strength (N/mm)	GB/T 2790	≥2
Heat Difference Resistance	GB/T 17748	No effect
Boiling Water Resistance	GB/T 17748	No effect
Chemical Resistance
Acid	GB/T 17748	No effect
Alkaline	GB/T 17748	No effect
Oil	GB/T 17748	No effect
Solvent	GB/T 17748	No effect
Washing	GB/T 9266	No effect over 10,000 times

Certificate

Recommended pattern

Niches

Why choose us?

Raw material:
1-Ink
Features:
Uniformity color
Temperature resistance

2-Glue
Features:
Good adhesion, no bubble

3-PET film
Features:
Excellent physical properties, chemical properties.
Uniformity of thickness.

Machine
1-We could improve the sharpness and clarity of patterns, also could create new colors which are difficult to customized.

2-Laminating machine, length is over 30m, which adopts closed loop and automatic tension control system, net-like rubber roll gluing and 25m oven. It make sure that the chemical residues of decorative film are lower than American standard.

3-Two 30㎡ oven. All finished products will be put in oven at least 72 hours to lower the chemical residues again and dry the glue.

QC
Testing before production:
1-Every batch of raw material will be tested.
2-All colors match by America X-Rite Color Master.

Testing during production:
QC will inspects product on production line every hour.

Testing after production:
1-Samples of every batch product will undergo 2 hours in boiling water test.

2-Samples of every batch product will undergo punching test for checking stretching and adhesion properties.

3-Polyma decorative film was certificated by ISO9001:2008 and Reach163.

Certificate

Lamination Illustration

Lamination Process

The mtal underneath the color film should be clean, oil free, moisture free as well as dust free before the color decorative film is laminated onto it. The production parameters for the lamination process may vary due to the variation of the bonding surface. Below is the picture of lamination process.

PLM02-P3 ACP Film

Related Products

content is empty!

Product Category

PLM02-P3

Related Products

Successful conclusion of the exhibition

New invention--Mosquito Repellent Metal Panel Film